Publicidad
Idiomas disponibles
Idiomas disponibles
EN
AUTO mode – When the humidifier is switched on, the auto mode is automatically activated and the
appears on the display. The humidifier checks the optimal air humidity every minute. If the air humidity is lower than
the optimal humidity, the humidifier starts to operate at the highest power; if the humidity in the room is sufficient,
the humidifier operates at lower power. Warm mist, UV, plasma and timer functions are available in the auto mode.
NIGHT and AUTO modes:
The appliance is automatically set to optimally humidify the air depending on the room temperature.
For example: The temperature of the room, in which the appliance operates, is 24 °C and the optimal humidity is 53 %.
The humidifier operates at maximum power until the optimal air humidity is reached. If the air humidity is lower than
53 %, the humidifier will operate at maximum power. When the humidity reaches 53 %, the humidifier automatically
reduces the power to the minimum. The humidifier checks the air humidity every minute.
Room
temperature
≤19
20
– see Humidi-
fier (C°)
Air humidity
65
60
(%)
HEALTH mode – When the health mode is activated, the
UV functions are automatically activated. The humidifier starts to operate at maximum power, the air humidity is
automatically set to 60 %. If the air humidity is lower than 60 %, the humidifier will operate at maximum power. When
the humidity reaches 60 %, the humidifier automatically reduces the power to the minimum. The humidifier checks
the air humidity every minute.
BABY mode – Touch the
automatically activated. The humidifier starts to operate at maximum power, the air humidity is automatically set
to 55 %. If the air humidity is lower than 55 %, the humidifier will operate at maximum power. When the humidity
reaches 55 %, the humidifier automatically reduces the power to the minimum. The humidifier checks the air
humidity every minute.
4. Press the
button to select the desired humidification time. The time can be set between 1-12 hours at intervals
of 1 hour, which is added by repeatedly pressing the button. If the timer function is active, the desired hour lights
up on the display. To deactivate the timer, press and hold the button until "Co" appears on the display, then release
the button and the timer will be deactivated.
5. Press the
to switch on the heated humidification and the
humidification starts in 10-15 minutes. To switch this function off, press the button again, the indicator on the
display disappears and the humidification will cool down again.
6. Press the
button to start the humidity level setting and the
desired humidity from 30 to 75 %. The desired air humidity can be set at intervals of 5 %. If the humidity exceeds
75 %, "Co" appears on the display and after three seconds the humidifier automatically switches to the AUTO mode.
After setting the desired humidity level, the display shows the current air humidity. Press the button again to view
the set value. The humidifier automatically adjusts the amount of steam according to the current humidity.
- If the humidity level is set to be 1-10 % higher than the current humidity. The humidifier sets the humidification
level to the first level.
- If the humidity level is set to be 10-15 % higher than the current humidity. The humidifier sets the humidification
level to the fourth level.
- If the humidity level is set to be 15 % higher than the current humidity. The humidifier sets the humidification
level to the seventh level.
If the humidity exceeds the set value, the appliance stops. It starts again when the air humidity drops below the set
level. Long press the
7. Press the
button to activate the plasma function, the
to deactivate the plasma function. Long press the
The appliance produces positive and negative ions using high voltage. Negative ions in much larger quantities than
positive ions. These ions are surrounded by molecules of water that ensure their long lifetime. The clusters of ions
80
21
22
23
24
25
58
57
55
53
50
indicator to activate the BABY mode. The warm mist, plasma and UV functions are
button to cancel the set values, the humidifier will automatically return to the AUTO mode.
26
27
28
29
30
48
45
43
40
38
symbol appears on the display. The warm mist and
indicator appears on the display. The heated
indicator appears on the display, select the
indicator appears on the display. Press the button again
button to switch on/off the appliance backlight.
31
32
33
34
35
36
35
34
32
31
symbol
36
≥37
30
25
ZV2021
Publicidad
