Publicidad
Idiomas disponibles
Idiomas disponibles
Fig. 4
NOTE: Unit will not operate unless filters and grill are properly installed.
1. On/Off and Speed Settings
• To turn the air cleaner on, press the ON/OFF
When the air cleaner is on, the LED light in the ON/OFF button on the control panel
will be lit and the air cleaner will start to operate on LOW speed.
• Once the air cleaner is ON, press the + button to increase the fan speed to the
MED. setting. Press the + again to increase the fan speed to HIGH setting. To
decrease the fan speed, press the – button until your desired setting is reached.
The fan speed setting is indicated by the LED ring around the fan icon.
• To turn the air cleaner OFF, simply press the ON/OFF
control panel.
2. Timer
There are four possible timer settings: 2 (two) hours, 4 (four) hours, 8 (eight) hours,
and 12 (twelve) hours. To activate the timer press the + button on the control panel
under the TIMER LED screen. Each time the + button is pressed, it will display the
successive settings. To return to a setting already passed, press the – button. Once a
timer setting has been selected, it will remain displayed on the LED screen. To operate
continuously, cycle through all timer settings until no timer setting is displayed.
3. Oscillation
To activate the oscillation, press the
second time.
4. Place the tabs at the bottom of
the grill cover into the base of the
unit. Gently push the grill cover
back into place until you hear
a click sound indicating that the grill
cover is firmly latched. Fig. 4
Connect the power cord into a
standard AC outlet.
button on the control panel.
button on the
button. To stop oscillation, press the button a
8
Clean Filter Indicator
The air cleaner is equipped with a CLEAN FILTER indicator to let the user know when
it is time to clean the True HEPA filters, about every 480 hours of use. When the True
HEPA filters are ready to be cleaned, the LED CLEAN FILTER indicator will light up on
the control panel.
If the air cleaner is used daily, we recommend cleaning the True HEPA filters more
frequently.
Once the True HEPA filters have been cleaned, press and hold the CLEAN FILTER
button until it beeps to reset the Indicator.
9
Publicidad
