Publicidad
Idiomas disponibles
Idiomas disponibles
Lithium-Ion Charging Status
Charger
Battery
Base
Pack
Indicator
Temperature
Light
Too hot
Green
Normal range
Red
Too cold
Green
Assembly
Connecting the Poles
1. Slide the middle pole into the lower pole assembly.
Align the screw holes (Fig. 5).
Fig. 5
Lower pole
assembly
2. Insert the bolt through the square hole in the pole and
secure the other end with the joint-fixing knob (Fig. 6).
Twist until tight.
NOTE: You may have to carefully move the wiring inside
the tube to one side if it blocks the path of the bolt.
Fig. 6
Joint-fixing
knob
Battery
Pack
Charging
Indicator
Status
Light
Flashing
Not charging
together
Flashing
Normal
one by one
charging
Flashing
Not charging
together
Middle pole
Bolt
3. Slide the upper pole assembly onto the middle pole.
Align the screw holes (Fig. 7).
Fig. 7
Upper pole
assembly
Middle pole
4. Insert the bolt through the square hole in the pole and
secure the other end with the joint-fixing knob (Fig. 8).
Twist until tight.
Fig. 8
Joint-fixing
knob
Operation
m
WARNING!
Keep the area to be cleared free of stones,
toys or other foreign objects that the rotor blades might pick
up and throw. Such items could be covered by snow and are
easy to overlook, so be sure to conduct a thorough inspection
of the area before beginning work.
Starting the Machine
1. Slide the battery down in the battery compartment until it
clicks to lock it into position (Fig. 9).
10
Square hole
Bolt
Publicidad
