Technical Data - JOCCA 5503 Manual De Instrucciones

22-EN
HOW TO CLEAN THE IMPURITIES CONTAINER (K):
1.To remove the container, first hold the handle of the removable
body (D) and press the eject button (E).
2.After removing the removable body (F) from the
motor body (H), turn the impurities container into
the open lock position outlined in the edge of the
removable body and carefully separate it from its
compartment.
3.Empty it and clean the inside of the container with soapy water
and let it dry.
4.To put the container of impurities back to its compartment,
you must fit it in such way that the arrow on the container edge
coincides with the open lock shaped figure in the removable
edge of the body. Turn the container slightly to match the closed
lock position.
NOTE: If the impurities container is not placed properly, these
units will not fit into the motor body.
5.Place the container and its removable compartment in the
vacuum cleaner, so you hear the fixing click of the eject button.
HOW TO CLEAN THE FILTER (J):
When the filter is dirty, it must be removed from the compartment
for cleaning:
1.Remove impurities container as described above to be able to
reach the filter.
2.Turn the filter compartment to the position LOOSE.
3.Remove the filter from its compartment and clean both parts:
- Shake the filter or use an air compressor to remove dirt. Do not
any cleaning liquid to clean the filter.
-The plastic compartment and metal mesh can be washed under
the tap water. Then let them dry before reassembling the parts.
4.Enter the filter back in its mesh compartment and press it firmly
in the removable body turning towards the position LOCK.
5.Clean the filter every 2-3 months, depending on use.

TECHNICAL DATA

220-240V ~ 50/60Hz 1400W
This device conforms to the safety requirements and provisions of
directives 2006/95/EC on Low tension devices and 2004/108/EC on
Electromagnetic Compatibility.
PROTECTION OF THE ENVIROMENT - DIRECTIVE
2002/96/EC
This product has been designed and manufactured with high
quality materials and components that can be recycled and
reused.
When you see the symbol of a crossed out litter bin on
wheels next to a product, this means that the product
conforms to the European Directive 2002/96/EC.
Please obtain information about the local recycling
system for electric and electronic products.
Follow the local rules and do not dispose of used
products by throwing them in the normal bins at home. Proper
recycling of your used product will help avoid negative impacts
on the environment and people's health.
EN-23