Publicidad
Idiomas disponibles
Idiomas disponibles
Replacing the light bulbs.
Remove screw
Cooktop Light/Night Light
Replace the burned-out bulb with a 120 volt, 20-watt
halogen bulb (WB36X10213), available from your
GE supplier.
1
To replace the bulb(s), first disconnect the
power at the main fuse or circuit breaker panel
or pull the plug.
Remove the screw at the right edge of the light
2
cover and push on the left edge of the cover
to open.
Be sure the bulb(s) to be replaced are cool
3
before removing. After breaking the adhesive
seal, remove the bulb by pulling straight out.
Replace with the same size and type bulb.
Raise the light shield and replace the screw.
4
Connect electrical power to the oven.
www.GEAppliances.com
35
Publicidad
