Cleaning and Maintenance
We recommend that the air cleaner be cleaned at least once a month and before storage.
1. Turn the air cleaner OFF and unplug it from the outlet
2. Use a dry cloth to clean the external surfaces of the air cleaner
3. The grill plate may be cleaned with a damp cloth or the brush attachment of
your vacuum cleaner.
DO NOT USE WATER, WAX, POLISH, OR ANY CHEMICAL SOLUTION
1 4
Troubleshooting
Problem
Possible Cause
The unit won't
• The unit is not
turn on
plugged in
• Nano-Coil filter is
incorrectly installed or
out of place
• Rear cover is not
completely attached
• The front or rear grill is
No air flow or
blocked by foreign objects
noticeable
cleaning effect
• The plastic bag is still on
the VOC/Odor filter
• The filters are dirty
• The unit has been running
for over 2,000 hours
Solution
• Plug the unit in
• Properly install the
Nano-Coil filter
• Make sure rear grill is
completely engaged
• Remove any obstacles
or check the pre-filter
and clean if needed
• Remove the plastic bag
• Clean or replace the
Nano-Coil filter and/
or clean the pre-filter
• Replace the
Nano-Coil filter
1 5