Technical Data; Dimensions; Controls, Indicators And Connections; Inspection Prior To Starting - Nilfisk-Advance SOL 3 Manual De Instrucciones

SOL 3 / SOL 5 W / BDC 3122 / BDC 3140 / E-VAC3000

Technical data

Parameter Unit
Voltage (50 Hz) V
Power rating kW
Noise level dB(A)
Protection IP
Insulation Class
Capacity L
Inlet (diameter) mm
Max vacuum mmH
Maximum
air flow rate
L/min'
(without hose
and reductions)
Main filter
m
surface

Dimensions

Model
L 60
A (mm)
L 100
B (mm)
C (mm)
Kg (1)
GB
(1) Net weight
■ Storage conditions:
Temperature: -10°C ÷ +40°C
Humidity: ≤ 85%
■ Operating conditions:
Maximum altitude: 800 m
(Up to 2,000 m with reduced performances)
Temperature: -10°C ÷ +40°C
Humidity: ≤ 85%
03/2009
SOL 5
W
SOL 3 BDC 3122 BDC 3140
E-VAC3000
230/400 230/400 230/400
2.2 4 2.2
71 74 71
55 55 55
F F F
60/100 60/100 100
70 70 70
O
3000 3000 3000
2
5100 8600 5100
2 1.95 1.95 1.95
Figure 3
SOL 5 W
SOL 3 BDC 3122
E-VAC3000
1330 1330 /
1530 1530 1530
1055 1055 1055
670 670 670
102 127 102
[ NOTE ]

Controls, indicators and connections

1 Container release lever
230/400
2 Castor lever
3 Manual filter shaker knob
4
4 Start/stop switch (normal version)
74
5 Start/stop switch (version for vacuuming liquids)
55
F

Inspection prior to starting

100
70
1 Inlet
3000
Prior to starting, check that:
■ The filter is installed.
8600
■ All latches are tightly locked.
■ The vacuum hose and tools have been correctly fitted
into the inlet (1).
1.95
■ The bag or safety container is installed, if applicable.
Do not use the vacuum cleaner if the filter is faulty.

Starting up

1 Castor brakes
BDC 3140
2 Start switch (normal version)
3
Start switch (version for vacuuming liquids)
/
1530
Lock the castor brakes before starting the vacuum cleaner (1).
1055
Starting/stopping the vacuum cleaner
670
127
Normal version
■ Turn the switch (2) to "I" position to start the vacuum
cleaner.
■ Turn the switch to "0" position to turn the vacuum cleaner
off.
Version for vacuuming liquids
■ Turn the switch (3) to "I" position to start the vacuum
cleaner.
■ Turn the switch to "0" position to turn the vacuum cleaner
off.
6
Figure 4
Figure 5
Figure 6