Check Fuel System; Check Spark Plug - Echo DM-6110 Manual De Instrucciones

Ocultar thumbs Ver también para DM-6110:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Maintenance and care

Check fuel system

Check spark plug

a: 0.6 - 0.7 mm
Check before every use.
After refuelling, make sure fuel does not leak or exude from
around fuel pipe (A), fuel grommet (B) or fuel tank cap (C).
In case of fuel leakage or exudation, there is a danger of fire.
Stop using the machine immediately and request your dealer
to inspect or replace.
1.
Check plug gap. Correct gap is 0.6 mm to 0.7 mm.
2.
Inspect electrode for wear.
3.
Inspect insulator for oil or other deposits.
4.
If the electrodesor terminals are worn, or if there are cracks
in the ceramics, replace them with new parts.
5.
Tighten to 15 N·m - 17 N·m (150 kgf·cm to 170 kgf·cm).
∗ The spark test (for checking whether the spark plug is spark-
ing) must be carried out by your dealer.
20

Publicidad

Tabla de contenido
loading

Tabla de contenido