Dynex DX-R27TV Guia Del Usuario página 14

14
Selecting the audio language
When two or more audio languages are included in a digital signal, you
can select one of the audio languages.
To select the audio language:
1 Press TUNER to select the Digital mode.
2 Press MENU/ENTER. The menu screen appears.
3 Press the VOL + and VOL - buttons to select the OPTION menu,
then press the CH + and CH - buttons to select DIGITAL SETUP.
4 Press the VOL + button. The DIGITAL SETUP menu appears.
5 Press the CH + and CH - buttons to select AUDIO LANGUAGE,
then press the VOL + button. The AUDIO LANGUAGE menu
appears.
6 Press the CH + and CH - buttons to select the desired language,
then press MENU/ENTER.
7 Press MENU/ENTER repeatedly until the menu screen is cleared.
Checking the digital signal strength
This television allows you to view the digital signal meter for digital
channels.
Notes:
The signal meter feature is not available for analog channels.
After four minutes, the SIGNAL METER screen returns to normal
television-operation automatically.
To check the digital signal strength:
1 Press MENU/ENTER. The menu screen appears.
2 Press the VOL + and VOL - buttons to select the OPTION menu,
then press the CH + and CH - buttons to select DIGITAL SETUP.
3 Press the VOL + button. The DIGITAL SETUP menu appears.
4 Press the CH + and CH - buttons to select SIGNAL METER, then
press the VOL + button to check the strength of the digital signal.
5 Press MENU/ENTER repeatedly until the menu screen is cleared.
Using the auto shut-off feature
When the auto shut-off feature is on and a station being viewed stops
broadcasting, the television will shut off automatically 15 minutes after
broadcasting stops.
To use the auto shut-off feature:
1 Press MENU/ENTER. The menu screen appears.
2 Press the VOL + and VOL - buttons to select the OPTION menu,
then press the CH + and CH - buttons to select AUTO SHUT OFF.
3 Press the CH + and CH - buttons to select ON or OFF.
4 Press EXIT to return to the normal screen.
Specifications
Design and specifications are subject to change without notice.
Power supply
Power Consumption
Operation
Standby
Chassis Construction
Weight
Width
Height
Depth
Inputs
VIDEO
AUDIO
S-VIDEO
COMPONENT
Output
AUDIO
Other
Antenna input
Picture tube
Tuner type
Receiving channels
Speakers
Sound output power
Specifications
AC 120V, 60 Hz
110 Watts
3 Watts
77.2 lbs. (35.0 kg)
20-1/8 inches (740 mm)
22-1/2 inches (571.5 mm)
19-1/4 inches (489.5 mm)
1 V (p-p)/75 ohms
–8 dBm/50k ohms
Y: 1 V (p-p), 75 ohms
C: 0.286 V (p-p), 75 ohms
Y: 1 V (p-p), 75 ohms
PR: 0.7 V (p-p), 75 ohms
PB: 0.7 V (p-p), 75 ohms
–8 dBm/50k ohms
VHF/UHF In 75 ohm coaxial
27 inches (676.0 mm diagonal)
NTSC Standard
ATSC Standard (8VSB), QAM
VHF 2-13
UHF 14-69
CABLE TV 14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-125 (100)-(125)
01 (5A)
2 inches (50.8 mm) x 3-1/2 inches
(88.9 mm), 8 ohm x 2
1.0 W + 1.0 W