Product Conformity - Dea LIVI 500 Instrucciones De Uso Y Advertencias

LIVI 500
Electro-mechanical operator for swing gates
Operating instructions and warnings
INDEX
OVERVIEW .......................................................7

1 PRODUCT CONFORMITY ..................................7

2 RESIDUAL RISK WARNINGS ............................7
3 MODELS AND CONTENTS OF THE PACKAGE ...8
4 OPERATING INSTRUCTIONS ...........................8
4.1 Product description ................................8
4.2 Technical data ........................................8
4.3 Labelling information ............................8
4.4 Appropriate conditions of use ..............8
4.5 Instructions for risk-freeoperation ........9
4.5.1 Transport – 9
4.5.2 Installation, assembly
and disassembly – 9
4.5.3 Starting – 9
4.5.4 Use – 9
4.5.5 Adjustment – 10
4.5.6 Maintenance and repair – 10
4.6 Training ...............................................10
4.7 Inappropriate use ................................10
5 SPARE PARTS LIST ..........................................10
6 COMPLETE CLOSING ASSEMBLY ...................10
6.1 Minimum level of protection
provided by the safety edge ................10
6.2 Crushing in the opening area .............10
6.3 Impact in the opening/closing area ....10
Example of typical installation ............27
ANNEXES
- Instructions for the final user
- Terms of warranty
OVERVIEW
SCOPE OF THE INSTRUCTIONS
These instructions were prepared by the manufacturer and
are an integral part of the product. The operations described
are intended for adequately trained and qualified personnel and
must be carefully read and conserved for future reference.
Chapters "2 RESIDUAL RISK WARNINGS" and "4 OPERA-
TING INSTRUCTIONS" contain all the information that DEA
System provides so that the product can constantly satisfy the
Essential Safety Requirements prescribed by the Machinery Di-
rective (European Directive 2006/42/CE).
Read these chapters carefully because they contain important
instructions for safe installation, use and maintenance and impor-
tant warnings regarding the residual risks remaining even after
all the safety devices and measures described have been applied.
The product is designed for installation in complete closing
systems subject to specific legislation. Chapter 6 "COMPLETE
CLOSING ASSEMBLY" provides useful information for the res-
pect of the Essential Safety Requisites for special types of closing.
1 PRODUCT CONFORMITY
DEA System guarantees the conformity of the product to
European Directives 2006/42/CE regarding machinery safety,
2004/108/CE and amendments regarding electromagnetic
compatibility and 2006/95/CE and amendments regarding low
voltage electrical equipment.
Operating instructions and warnings
2 RESIDUAL RISK WARNINGS
Read these warnings carefully; the failure to respect the fol-
lowing warnings can create risk situations.
WARNING Using the product under unusual conditions not
foreseen by the manufacturer can create situations of danger,
this is the reason why all the conditions prescribed in these
instructions must be respected.
WARNING Under no circumnstances must the product be
used in an explosive enviroment or surroundings that may
prove corrosive and damage parts of the product.
WARNING All installation, maintenance, cleaning or repair
operations on any part of the system must be performed
exclusively by qualified personnel with the power supply
disconnected working in strict compliance with the electrical
standards and regulations in force in the nation of installa-
tion.
WARNING All the other adjustment/setting operations
beyond the adjustment of the oil flow are made by the manu-
facturer. Tampering with these settings may cause malfunction
and/or situations of risk to people, animals and property. Re-
frain from performing any operations not authorised by DEA
System.
WARNING The use of spare parts not indicated by DEA Sy-
stem and/or incorrect re-assembly can create risk to people,
animals and property and also damage the product. For this
reason, always use only the parts indicated by DEA System
and scrupulously follow all assembly instructions.
WARNING Awareness of the operation of the key-release
mechanism (see F9 Page 33) is essential for all users of the
automatism because the failure to use the device quickly du-
ring emergencies can jeopardise people, animals and pro-
perty. Enclosure I to these instructions, which the installer is
required to deliver to the final user, illustrates operation and
can be detached.
WARNING DEA System reminds all users that the selection,
positioning and installation of all materials and devices which
make up the complete automation system, must comply with
the European Directives 2006/42/CE (Machinery Directive),
2004/108/CE and subsequent amendments (electromagne-
tic compatibility), 2006/95/CE and subsequent amendments
(low voltage electrical equipment). In order to ensure a suita-
ble level of safety, besides complying with local regulations, it
is advisable to comply also with the above mentioned Directi-
ves in all extra European countries.
WARNING To ensure an appropriate level of electrical safety
always keep the 230V power supply cables apart (minimum
4mm in the open or 1 mm through insulation) from low volta-
ge cables (motors power supply, controls, electric locks, aerial
and auxiliary circuits power supply), and fasten the latter with
appropriate clamps near the terminal boards.
WARNING Wrong assessment of impact forces may cause
serious damage to people, animal and things. DEA System
reminds all personnel that the installer must ascertain that
these impact forces, measured according to EN 12445 pre-
scriptions, are actually below the limits indicated by EN14453
regulation.
L I V I 5 0 0
ENGLISH
7