Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO USE
This appliance is intended for household use. It is for indoor use only.
Important: The power cord has a yellow marking and a red marking to help you determine the maximum
length to use. Up to the yellow marking is the recommended length. Never pull cord beyond the red marking.
This vacuum cleaner is equipped with an overheat protection system. If for some reason your vacuum
overheats, the motor will turn off. Should this occur, turn the switch off
the wall outlet. Allow the motor to cool for a minimum of 15 minutes prior to re-starting the unit. To prevent
overheating make sure that the filters and the dust bin are clean.
6. Holding the power cord by the plug, pull out the required length and plug into a standard electric outlet.
7. Press variable speed control to desired setting.
8. Press the On/Off push button
9. Adjust the suction power by sliding the vacuum suction control on the hose.
10. Press the adjuster on the combination floor brush to switch to floors or carpets.
11. As you vacuum, check the removable plastic dust collector frequently; when the dust collector is full
empty it. To empty the dust collector, see Dust Collect or in the Care and Cleaning section.
12. When finished vacuuming, press the On/Off push button
13. Unplug unit.
14. Press the retractable cord push button
Caution:
• The cord moves fast when retracting. Stand clear of the cord as it rewinds so it does not swing into you.
• To prevent cord from whipping when rewinding, hold plug when rewinding onto cord reel..
VACUUM ACCESORIES
CREVICE TOOL: use to clean edges, corners, and sides of upholstery.
EXTENSION TUBES: use in combination with flexible hose for added length and height.
FLEXIBLE SWIVEL HOSE: flexible hose with an adjustable suction feature.
COMBINATION FLOOR BRUSH: use to vacuum grime on all surfaces.
CARE AND CLEANING
This appliance contains no user-serviceable parts. Refer service to qualified service personnel.
Important: Always turn off and unplug the unit before cleaning any parts.
CLEANING
Note:
To maintain maximum cleaning performance, empty the dust collector when is at max level, and clean
or replace the HEPA exhaust filter, the cyclonic filter, and the motor dust filter often.
DUST COLLECTOR
15. To remove dust collector, press release button on the handle and lift up.
16. Press and release button on the dust collector to open the lid and empty the dust collector.
17. Wash in warm sudsy water with mild detergent.
18. Dry the dust collector completely with a soft cloth before reinstalling.
to start the vacuum cleaner.
.The cord winds back into the unit.
11
and unplug the vacuum from
to turn off the unit.
Publicidad
