Descargar Imprimir esta página

EINHELL 4326311 Manual De Instrucciones Original página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

Metal Hydride, or Lithium-Ion) batteries.
6. Do not dispose of batteries in fi re.
7. Batteries should be recycled or disposed of
as per state and local guidelines.
When shipping or disposing of batteries and
cordless tools, always ensure that they are
packed individually in plastic bags to prevent
short circuits and fi res.
Special safety information for the cordless
reciprocating saw
Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting
accessory contacting a live wire may make
exposed metal parts of the power tool "live"
and could give the operator an electric shock.
Keep the tools in a safe place and out of the
reach of children.
When sawing, always wear safety goggles,
protective gloves and ear muffs; use a dust
mask on dusty jobs.
Always remove keys and wrenches after use.
Before switching on, make sure that all keys
and wrenches have been removed from the
tool.
Secure the workpiece to prevent it slipping
(clamp).
Use on materials containing asbestos is
prohibited.
Note the corresponding accident prevention
regulation issued by the professional
associations in your country.
Use only original replacement parts.
Repairs may only be carried out by a qualified
electrician.
The noise generated at the workplace may
exceed 85 db(A). The operator will require
noise protection measures and ear muffs if
this is the case.
Ensure that you maintain a steady foothold.
Avoid abnormal working postures.
Do not expose your electric tool to rain. Never
use electric tools in damp or wet locations or
near flammable liquids or gases.
Keep your work area tidy.
Wear suitable work clothes. Never wear loose
fitting clothes and jewelry. Wear a hair net if
you have long hair.
For your own safety, use only accessories
and auxiliary equipment from the
manufacturer of your electric tool.
Use only saw blades that are sharp and
Anl_TE_AP_18_28_Li_BL_USA_SPK7.indb 11
Anl_TE_AP_18_28_Li_BL_USA_SPK7.indb 11
EN
clean. Replace bent and cracked saw blades
immediately.
After you have switched off the saw, do
not slow down the saw blade by applying
pressure to its side.
Make sure that the feed speed is uniform,
as this will reduce the risk of accidents and
increase the service life of both the saw blade
and the saw.
Use only a damp cloth to clean your saw. Do
not use any aggressive agents for cleaning
purposes.
Check your saw to ensure that it is in good
working order. If the saw fails to work properly,
have it checked. Have all maintenance and
inspection work carried out only by a qualified
electrician.
Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the workpiece by
hand or against your body leaves it unstable
and may lead to loss of control.
SAVE THESE INSTRUCTIONS
2. Layout and items supplied
2.1 Layout
1. On/Off switch
2. Locking button for On/Off switch
3. Soleplate
4. Blade holder
5. Locking button for soleplate
6. Ring
7. Saw blade
8. Handle
9. Lock for handle
10. Pushlock button
11. Battery capacity indicator
12. Battery capacity indicator button
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
Open the packaging and take out the
equipment with care.
Remove the packaging material and any
packaging and/or transportation braces (if
present).
- 11 -
07.05.2021 09:10:56
07.05.2021 09:10:56

Publicidad

loading

Este manual también es adecuado para:

Te-ap 18/28 li bl