Publicidad
Idiomas disponibles
Idiomas disponibles
5 Cycles Button
Press the Cycles button repeatedly to scroll through
the cycle selections until the desired cycle is selected.
The standard presets for the selected cycle will be
shown in the display. On MANUAL DRY cycles,
these settings can be adjusted using the cycle setting
buttons any time before starting the cycle.
6 more Time/Less Time Buttons
Use these buttons with the Time Dry and other
MANUAL DRY cycles to adjust the drying time.
Press the more Time button to increase the selected
manual cycle time by 1 minute; press the Less Time
button to decrease the cycle time by 1 minute.
7 Cycle Option Buttons
The cycle option buttons allow you to select additional
cycle options. Certain buttons also allow you to
activate special functions by pressing and holding the
button for 3 seconds.
8 Cycle modifier Buttons
Use these buttons to select the desired cycle settings
for the selected cycle. The current settings are shown
in the display. Press the button for that option to
select other settings.
9 Cycle Completion Indicator with Check Filter
Reminder
This portion of the display shows which stage of the
drying cycle is currently underway (Check Filter, Dry,
Cooling).
3828EL2001M_en_170712.indd 31
11
10
14
13
9
12
10 Check Filter Reminder
The display will show Check filter when the dryer is
turned on as a reminder to check the filter. It turns off
when the START/PAUSE button is pressed.
11 Flow Sense
™
Duct Blockage Sensing System
Indicator
The Flow Sense™ duct blockage sensing system
detects and alerts you to blockages in the ductwork
that reduce exhaust flow from the dryer. Maintaining
a clean exhaust system improves operating efficiency
and helps minimize service calls, saving you money.
12 Estimated Time Remaining
This display shows the estimated time remaining for
SENSOR DRY cycles or the actual time remaining for
Time Dry or MANUAL DRY cycles.
NOTE
The cycle time on SENSOR DRY cycles may
fluctuate as the dryer recalculates drying time for
optimal results.
13 Custom Pgm
If you have a special combination of settings that
you use frequently, you can save these settings as a
Custom Program.
14 Child Lock Indicator
When Child Lock is set, the Child Lock indicator
appears and all buttons are disabled except the
POWER button. This prevents children from changing
settings while the dryer is operating.
OPERATION
31
2017-07-12 오후 4:04:43
Publicidad
