Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Condensation
Symptom
Condensation forms
on the interior walls.
Water/ice (dispenser models only)
Symptom
Water flow is weaker
than normal.
Ice maker makes a
buzzing sound.
Ice maker does not
make ice.
78
English
FDR_AW2-FS_DA68-03873A-00_EN.indd 78
Possible causes
• If door is left open, moisture
enters the refrigerator.
• Food with high moisture
content.
Possible causes
• Water pressure is too low.
• The ice maker function is
activated, but the water
supply to the refrigerator
has not been connected.
• Ice maker has just been
installed.
• Freezer temperature is too
high.
• Dispenser panel Lock is
activated.
• Ice maker is off.
Solution
• Remove the moisture and
do not leave a door open
for extended periods of
time.
• Make sure food is wrapped
airtight.
Solution
• Make sure the water
pressure is between 30 to
120 psi (206 to 827 kPa).
• Press Ice Maker.
• You must wait for 12 hours
for the refrigerator to make
ice.
• Set the freezer temperature
below 0 °F (-18 °C) or -4 °F
(-20 °C) in warm ambient
air.
• Deactivate dispenser panel
Lock.
• Turn on the ice maker.
2019-05-17
10:23:39
Publicidad
