Installation
To reattach the fridge door
After you have moved the refrigerator to its final location, reattach the doors by following
the removal instructions in reverse order.
A
02
01 Dispenser
02 Center of transparent coupler
03 Guidelines
22
English
Untitled-8 22
B
01
03
4. Lift straight up to remove the door.
• Repeat this step on the other side.
CAUTION
Do not remove both doors simultaneously.
Make sure to remove one door at a time.
Otherwise, any of the doors may fall and
cause physical injury.
5. Remove the middle hinge.
• Remove the screw from the hinge using
a Phillips screwdriver.
• Remove 1 hex-head bolts from the
hinge using an Allen wrench (
5 mm).
• Remove the middle hinge.
• Repeat this step on the other side.
CAUTION
To prevent water leaks from the dispenser,
the water line must be fully connected.
Make sure both tubes of the water line are
inserted fully to the center of transparent
coupler (A) or the guidelines (B).
/
",
1
4
2017-03-15
11:55:40