Publicidad
Idiomas disponibles
Idiomas disponibles
REMOTE CONTROL BATTERY REPLACEMENT
1. Use a small Phillips-head
screwdriver to unscrew the
battery compartment screw.
NOTE: The screw is not
removable.
4. Install a new CR-2032 button
cell battery following the polarity
as shown.
WARNING –
This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is
swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours.
Always completely secure the battery compartment. If the battery compartment does not close securely, stop
using the product, remove the batteries, and keep it away from children. If you think batteries might have
been swallowed or placed inside any part of the body, seek immediate medical attention.
The CR 2032 coin cell battery in the remote should be disposed of properly according to local, state, and federal
regulations/laws.
2. Remove the battery cover.
5. Replace the battery cover and
screw closed.
CHEMICAL BURN HAZARD. KEEP BATTERIES AWAY FROM CHILDREN.
12
3. Remove the button cell
battery and dispose of per
local regulations.
Publicidad
