LG WM3770H A Serie Manual De Propietario página 15

Connecting the Drain Line
Secure the drain hose in place to prevent moving
and leaking.
NOTE
The drain hose should be properly secured.
Failure to properly secure the drain hose can
result in flooding and malfunction.
The end of the drain hose should not be less
than 29 inches (73.7 cm) or more than 96 inches
(244.8 cm) from the bottom of the washer.
The drain must be installed in accordance with
any applicable local codes and regulations.
Make sure that the water lines are not stretched,
pinched, crushed, or kinked.
Using a Standpipe
1 Clip the end of the hose into the elbow bracket.
- Connect the elbow bracket within 4 inches (10
cm) from the end of the drain hose. If the drain
hose is extended more than 4 inches (10 cm)
beyond the end of the elbow bracket, mold or
microorganisms could spread to the inside of
the washer.
Elbow bracket
2
Insert the end of the drain hose into the standpipe.
3 Use a tie strap to secure the drain hose in place.
No more than
4 inches (10 cm)
Elbow Bracket
Drain Hose
Using a Laundry Tub
1
Clip the end of the hose into the elbow bracket.
- Connect the elbow bracket within 4 inches (10
cm) from the end of the drain hose. If the drain
hose is extended more than 4 inches (10 cm)
beyond the end of the elbow bracket, mold, or
microorganisms could spread to the inside of
the washer.
Elbow bracket
2
Hang the end of the drain hose over the side of
the laundry tub.
3
Use a tie strap to secure the drain hose in place.
INSTALLATION
No more than
4 inches (10 cm)
Elbow Bracket
Drain Hose
15