2. Wiring diagram
2.1 Wiring connection to a unit for
Connect wire controller to multi-function control board through 4-core shield cable.
This requires cutting the connector on the cable 4-wire connection and connect cables to
Multi-function module such as shown in the following figures
CL94384
Red
Black
Yellow
Brown
Remote Controller
Note:
If the connection cable 6 m supplied is not long enough for your installation,
you can cut it and extend it, provided they do not exceed 20 m in length.
Wall mounted split
4-core shield cable (6m)
Red
-----------------------------------
Black
-----------------------------------
Yellow
-----------------------------------
Brown
-----------------------------------
4-core shield cable (6m)
39
(Range MUPR).
(See Fig.3-2 and Fig.3-3).
MULTI-FUNCTION MODULE
CN42
CN41
Cut away
Fig 3-2
CL94383
12V
CN41
E
Y
CN42
X
Multi Function Board
Fig 3-3