Würth STP 140 EXACT-B Traducción Del Manual De Instrucciones De Servicio Original página 17

OBJ_BUCH-1633-001.book Page 17 Thursday, March 15, 2012 7:40 AM
Action
Switching On and Off
Guide the power tool toward
the workpiece only when
switched on
Switching the worklight On/Off
Lubrication when cutting metal
Plunge Cutting
Maintenance and Cleaning
❏ For safe and proper working, always keep
the machine and ventilation slots clean.
When replacing the power tool's cable is required,
have this carried out by a Würth master-Service or by
an authorised customer services agent for Würth
power tools, in order to avoid hazardous situations.
Clean the saw blade holder regularly. For this,
remove the saw blade from the machine and lightly
tap out the machine on a level surface.
Regularly spray penetrating oil onto the saw blade
holder (see figure 17, page 199).
Check the guide roller regularly. If worn, it must be
replaced by an authorised customer service agent for
Würth power tools.
Lubricate the guide roller occasionally with a drop of
oil (see figure 18, page 200).
If the machine should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by a Würth master-Service.
In all correspondence and spare parts orders, please
always include the article number given on the type
plate of the machine.
The current spare parts list for this power tool can be
viewed in the Internet under
"http://www.wuerth.com/partsmanager"
or be requested from your next Würth branch office.
Figure Please observe
11
12
13
14
15
Guarantee
For this Würth power tool, we provide a guarantee in
accordance with the legal/country-specific regula-
tions from the date of purchase (verified by invoice or
delivery document). Damage that has occurred will
be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
Claims can only be accepted if the power tool is sent
undisassembled to a Würth branch office, your Würth
sales representative or a customer service agent for
Würth power tools.
Disposal
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
Do not dispose of power tools into household waste!
Only for EC countries:
According to the European Guideline
2002/96/EC for Waste Electrical and
Electronic Equipment and its imple-
mentation into national right, power
tools that are no longer usable must be
collected separately and disposed of in
an environmentally correct manner.
Subject to change without notice.
Page
196–197
197
197–198
198
198–199
17