Holex 421729 Manual Del Usuario página 20

HOLEX Digital outside micrometer with disc measuring surface
de
1. General instructions
Read the instructions for use, follow them and keep them available for later reference.
bg
2. Safety
da
2.1. GROUPED SAFETY MESSAGES
CAUTION
en
Leaking electrolyte
Eye and skin irritation due to leaking, toxic and corrosive electrolyte.
▶ Avoid contact with your eyes and body.
fi
▶ In the event of contact, rinse out the affected area immediately with plenty of water and consult a doctor.
2.2. INTENDED USE
fr
 Outside micrometer for digital and analogue reading.
 For both industrial and private use.
 Use it only in accordance with the technical data.
it
 Use only when it is technically in good condition and safe to operate.
2.3. REASONABLY FORESEEABLE MISUSE
 Avoid vibration, abrupt movement, shaking, impacts.
hr
 Do not use in explosion hazard areas.
 Do not expose to strong magnetic fields or high voltage environments.
lt
 Do not expose the work lamp to intense heat, direct sunlight or naked flames.
 Open the casing only at the battery cover to change the batteries.
 Do not make any unauthorised modifications.
nl
3. Transport
Transport in the original packaging at temperatures between -10°C and +60°C. Prevent from falling.
no
4. Device overview
4.1. OUTSIDE MICROMETER
pl
A
1 Yoke 2 Anvil with disc measuring surface 3 Measuring spindle with disc measuring surface 4 Clamping lever 5 But-
ton "ON/OFF - SET" 6 Button "ABS/INC - UNIT" 7 Scale sleeve 8 Scale drum 9 Friction ratchet 10 Quick adjustment 11
pt
Battery cover (back) 12 Adjustment hole (back) 13
4.2. DISPLAY
ro
B
Digital display:
1 Low battery voltage 2 Measuring mode "Absolute" 3 Measuring mode "Incremental" 4 Zero point adjustment 5 Di-
sv
gital measured value 6 Display measuring unit
Analogue display:
7 0.01 mm - scale on scale drum 8 Scale for full millimetres on scale sleeve 9 Bezugslinie 10 Skala für halbe Millimeter auf
sk
Skalenhülse 11 Reading edge
4.3. SCOPE OF SUPPLY
sl
 1x Outside micrometer
 For measuring range from 25 mm: 1x setting gauge
 1x Adjustment tool
es
cs
hu
20
Lorem ipsum
LCD-display 14 Insulating plate 15 Adjustment tool