ATEZR P5 Plus Manual De Instrucciones página 16

Emergency Button
Adjust The Belt Tension
Y axis:
1. Loosen the fixing nut on the side
2. Adjust the back tightening nut, and
adjust the belt to the proper tightness
3. Tighten the side-fixing nut
X-axis:
1. Loosen the fixing nut on the side
2. Adjust the back tightening nut, and
adjust the belt to the proper tightness
3. Tighten the side-fixing nut
Scan the QG code to find the installation tutorial video.
On/Off
Power Interface
Data Cable
Interface
Loose
Loose
Reset
Tf Card Slot
01
Loose
Tight
01
Tight
02
Tight
02
Tight
Loose
- 14 -