ATEZR P5 Plus Manual De Instrucciones página 5

Cautions
01
High-intensity laser beams generate extremely high temperatures and a lot of heat
as cutting burns the substrate quantity. Certain materials may catch fire during cutting,
creating gas and smoke. Do not leave the machine unattended during the engraving
process. After use, be sure to clean up the sundries and inflammables in the
machine. Always keep an available fire extinguisher nearby to ensure safety. When
using a laser engraver, the material generates fumes, vapors, particles, and toxic
materials in plastics and other combustible materials. These smog or air pollutants
may harmful to health.
02
When installing the equipment, make sure that the workplace must be clean and
that there are no flammable or explosive items. A sheet of metal must be placed under
the bottom when engraving or cutting.
03
When using the laser engraving machine, it is recommended to wear laser safety
goggles. Avoid skin exposure to type 4 beams, especially at close range. Youth aged
12-18 must have parental supervision during use. Do not touch the laser engraving
module when the machine is on.
Scan the QG code to find the installation tutorial video.
- 03 -