Sensica Sensilift STG100 Manual Del Usuario página 13

faster and more even heating.
You can achieve maximum
results with all RF energy levels,
but, for lower levels, it will
take more time to reach the
effective temperature.
Getting Started
Step 1: Prepare your skin
1. Prior to use, make sure your
skin is dry, clean and free of
topical products such as:
moisturizers, liquids or lint.
2. Remove jewelry from the
treatment area as well as
from your hands, prior to use.
3. Never use flammable
liquids such as alcohol
(including perfumes,
sanitizers, or other
applications containing
alcohol) or acetone on the
skin one hour before using
the device as it may cause
burning of the skin.
4. The device is suitable for
men. However, male users
should make sure their skin
is clean-shaven before
treatment.
Step 2: Device Operation
Note: A preliminary test should
be conducted separately for
each area you intend to treat
before proceeding with a full
treatment in that area. See
Preliminary Test section above.
1. Make sure the device is
clean, dry and intact prior
to use.
2. Apply an even layer of
Base Gel, included in your
kit, on the area of your skin
intended for treatment.
3. Set the Radio Frequency
(RF) energy level and the
massage speed to the
level you selected in your
preliminary test treatment.
Gently touch the RF energy
level selection button
repeatedly until you reach
the desired level: 1, 2, or 3.
Gently touch the massage
level button repeatedly
until you reach the desired
level: 1 or 2.
4. The activation of either RF
or massage functions can
be done independently or
together. Both functions
will be activated at level 1.
13