Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFETY INSTRUCTIONS
WARNING
the warnings and instructions may result in electric
shock, fire and/or serious injury. Save all warnings and
instructions for future reference.
WORK AREA SAFETY
• To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
• Store idle light out of reach of children. Warm lights
can become hazardous in the hands of children.
• Suitable for rain and wet locations. Store indoors.
PERSONAL SAFETY
• Do not overreach. Keep proper footing and balance
at all times. This enables better control of the light in
unexpected situations.
• Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
light in unexpected situations.
• To reduce the risk of injury, do not look directly
into the light when the search light is on.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
• Use light only with specifically designated battery
packs. Use of any other battery packs may create a
risk of injury and fire.
• When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid con-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or
risk of injury.
• Do not expose a battery pack or tool to fire or ex-
cessive temperature. Exposure to fire or temperature
above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging im-
properly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
SERVICE
• Have your light serviced by a qualified repair per-
son using only identical replacement parts. This
will ensure that the safety of the light is maintained.
• Never service damaged battery packs. Service of
battery packs should only be performed by the manu-
facturer or authorized service providers.
SPECIFIC SAFETY RULES
• Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
Read all safety warn-
ings and all instruc-
tions. Failure to follow
SYMBOLOGY
Volts
Direct Current
Underwriters Laboratories, Inc.
C
US
United States and Canada
SPECIFICATIONS
Cat. No. .................................................... 2354-20
Battery Type ................................................M18™
Charger Type ...............................................M18™
DC Input Volts.................................................... 18
Max DC Input Amps.......................................... 1.1
ASSEMBLY
Recharge only with the charger
WARNING
specified for the battery. For spe-
cific charging instructions, read the operator's
manual supplied with your charger and battery.
Inserting/Removing the Battery
Insert the battery pack by sliding battery pack into
the body of the tool. Insert the battery pack until the
battery latches lock.
To remove the battery pack, press in both battery
latches and slide the battery pack off of the tool.
OPERATION
To reduce the risk of injury, do not
WARNING
look directly into the light when the
search light is on.
To turn on the search light, press the Power button
. Press the MODE button to cycle through High,
Medium and Low settings. Hold the MODE button
for three seconds to turn on strobe lighting. To turn
off the search light, press the Power button
NOTE: The light will default to the selected brightness
the next time it is turned on.
MAINTENANCE
To reduce the risk of injury, always
WARNING
unplug the tool and charger and re-
move the battery pack from the charger or tool be-
fore performing any maintenance. Never disas-
semble the tool, battery pack or charger. Contact a
MILWAUKEE service facility for ALL repairs.
Maintain Search Light
Keep your search light, battery pack and charger
in good repair by adopting a regular maintenance
program. If the search light does not work properly,
return the search light to a MILWAUKEE service
facility for repairs.
To reduce the risk of personal in-
WARNING
jury and damage, never immerse
your tool, battery pack or charger in liquid or
allow a liquid to flow inside them.
2
again.
Publicidad
