Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Select the wireless AP you want to connect to.
•
: Locked with Security Code
•
: Signal Strength
• You can check the MAC address of the Fridge on the bottom
of the Screen.
• If there are no APs showing on the screen, press the [Search] menu at the bottom.
• Depending on the wireless AP type, the refrigerator may not make a connection.
We recommended you use a wireless AP that supports IEEE802.11b/g/n.
• If you don't have a wireless router, please contact your Internet provider or purchase and install
one yourself.
• If you can't remember the name of your wireless network system (SSID) or its security code,
please see the user manual of your router.
• Radio frequency signals can interfere with any the wireless network system and they may affect
the network performance of your refrigerator.
• Obstacles such as concrete walls and metallic doors, and radio and microwave interference
from devices such as microwave ovens can affect the operation of your wireless network
system.
• Depending on the type and location of your wireless network system and the surrounding
environment, the range and quality of your wireless network may vary.
4.
If your wireless network has a security code, enter the security
code, and then press the [OK] button. In most cases, after you
have entered the security code, the refrigerator acquires the
Network addresses it needs (IP Address, Subnet Mask, Gateway,
and DNS) to connect to the network. If it does not or you need to
enter these values manually, go to Step 6.
5.
After the refrigerator has connected to your network, you can select the [IP Address] button on the
Wi-Fi Networks screen to view the current IP address and Gateway values.
DA68-02935A-10.indb 87
operating _87
2018. 7. 9.
4:54
Publicidad
Tabla de contenido
