Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TOUCH SCREEN CORRECTION
You can calibrate the stylus touch point to best meet your needs.
To adjust the stylus touch point on the touch screen:
1.
Press the
button in the right bottom corner of the Settings list.
2.
Select [Touch Screen Correction] in the Settings list.
USA
CANADA
3.
Press the [Yes] button. A screen appears with pointer instructions on the top.
4.
Press down lightly on the center of the "+" mark. Repeat as the "+" mark moves across the screen.
• If you do not press the center of the [+] properly, the cross mark appears repeatedly.
If you cannot run the Touch Screen Correction function in Settings because the touch screen input point
is incorrect:
1.
Press and hold the Epicurious icon on the home screen for 5 seconds.
This will launch the select screen calibration function.
2.
The screen will display a series of cross icons.
Press the exact center of each cross icon as it appears on the screen.
DA68-02935A-10.indb 91
operating _91
2018. 7. 9.
4:54
Publicidad
Tabla de contenido
