Descargar Imprimir esta página

Imetec R0102 Instrucciones De Uso página 16

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
sides and finish on the forehead.
During use, when the plates heat and cool, position the appliance
on a smooth and heat resistant surface.
While straightening, be careful not to near the plates too much to
EN
the sensitive parts of the face, ears, neck or head.
Leave the plates to cool down completely when finished, before
putting the appliance away.
PREPARING YOUR HAIR
Wash hair as normal and comb to remove knots.
Dry your hair and brush from the roots to the ends.
Divide hair into sections and start straightening from the nape of
the neck.
USER INSTRUCTIONS
Remove the protective covers (9a - 9b) by sliding them up to the
lock (Fig.A) and then pull them upwards (Fig.B).
Use the specific closing lock (6) to open the plates
Choose the style you want to create (straight or wavy) and place
the styler with the display facing upwards.
To create waves, both wavy plates must face inwards. If they are not
in this position, pull the upper cold tip (8) outwards and, at the same
time, turn it 180 degrees to the left (Fig. C) so that they face inwards.
Repeat the step with the lower cold tip (8).
For straight hair, both smooth plates must face inwards. If they are
WARNING! This appliance is not to be
used if it has been dropped or if there
are visible signs of damage.
WARNING! DO NOT use this appliance
near bathtubs, showers, basins or
other vessels containing water. Never
place the appliance into water.
WARNING! Risk of fire. DO NOT use
flammable products on hair or on the
appliance.
CAUTION! Before changing the direction
of the accessory, make sure that the styler
is cold.
USE
13

Publicidad

loading