Alice's Garden ALOMBRA AWM3X2KD Manual Del Usuario página 25

STEP 2: MARKING THE PLACEMENT ON THE WALL
FOR THE 3X2
Mark the placement of the wall brackets by drawing a vertical dash for each of them. The centre-to-centre
distance, meaning the distance between the centre of each bracket, must be the length of the awning minus
14cm. Making a centre-to-centre distance of 2.81 metres (2950mm-140mm=2810mm)
10cm
H
10cm
H
FOR THE 4X2.5
Mark the placement of the wall brackets by drawing a vertical dash for each of them. The centre-to-centre
distance, meaning the distance between the centre of each bracket, must be the length of the awning minus
14cm. Making a centre-to-centre distance of 3.81 metres (3950mm-140mm=3810mm). The middle bracket
must be placed equidistantly between the two side brackets, so at 1.905 metres (3950mm-140mm /2).
10cm
H
10cm
H
WARNING! Always check the piece is straight vertically and horizontally using a
30/09/2019
L-14cm = 2.81m
L-14cm = 2.81m
L-14cm = 3.81m
(L-14cm)/2
L-14cm = 3.81m
(L-14cm)/2
spirit level.
EN
25