Kohler K-3497 Guia De Instalacion página 6

Tank to Bowl
Gasket
Bolt
3. Install the Tank
Slide the tank retaining bolts into the bracket attached to the
bottom of the tank. The bracket is shipped in place. Install the
tank-to-bowl gasket.
Position the tank on the bowl by centering the gasket on the bowl
inlet.
CAUTION: Risk of product damage. Overtightening may cause
breakage or chipping of the vitreous china.
Assemble the washers and nuts to the tank bolts. Alternately
tighten the nuts so the tank is level and the mounting bracket
tabs contact the bowl.
Be sure the nuts are tight enough to achieve a watertight seal. Do
not overtighten.
1020805-2-E
Bolt
Washer
Nut
6 Kohler Co.