SIOUX SPS10P18 Instrucciones Y Lista De Piezas

INSTRUCTIONS & PARTS LIST FOR SPS10P18, SPS10P6 & SPS07P12 PISTOL SANDER
Read and understand these instructions before operating this tool.
Everyone using, maintaining, changing accessories or working near this tool must read, understand and follow these Safety Instructions!
Improperly used power tools can cause injury or death. Be sure these instructions accompany the tool when passed on to a different user.
Sioux power tools may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Only qualified operators should install, adjust or use this sander. Do not modify this sander. Do not use the sander if it has been
damaged or modified. Tools should be inspected periodically to ensure markings are legibly marked.
Sanders can cause flying particles.
Proper eye protection must be worn at all times by tool user and bystanders. Failure of the workpiece, accessories or the inserted
tool can cause high velocity projectiles. Ensure the workpiece is securely fixed. Remove the adjustment tools before sanding
starts. Ensure sparks and cuttings are directed not to cause a hazard. For overhead work, wear a safety helmet. Assess the risk
to others before beginning sanding.
Flying particles can cause eye injury.
Sanders present a risk of entanglement.
Keep loose hair away from power tools and accessories. Keep hands away from moving parts of the tool and accessories. Do
not wear jewelry, loose clothing, or neckwear around power tools. Keep work area clear of cleaning rags and all items that could
become entangled with the tool.
Entanglements can cause injuries.
Sanders present a risk of operating hazards.
Wear gloves to protect from cuts, abrasion and heat. Operators and maintenance personnel should be physically able to handle
the bulk, weight and power of the tool. Hold the tool firmly and be ready to counteract normal or sudden movements. Maintain a
balanced body positon. High-reaction torque can develop in the case of stalling. Which can be caused by excessive loads being
applied to the tool. Use a suspension device or side handles whenever possible. Keep hands away from the rotating chuck and
sanding pad. Release the start-stop device in the case of an interruption of the air supply. Safety glasses are required. Gloves
and protective clothing are recommended. Use only lubricants recommended by Sioux Tools. Inspect the backing pad before
each use. Do not use if cracked or broken or if it has been dropped. Never run the tool unless the abrasive is applied to the
workpiece. There is a risk of electrostatic discharge if used on plastic and other non-conductive materials. Potentially explosive
atmospheres can be caused by dust and fumes resulting from sanding. Always use dust extraction or suppression systems
which are suitable for the material being processed.
Hazards from operating a sander may cause injury.
Operating sanders may cause discomfort.
Use a comfortable, not off-balance posture. Change posture during extended tasks.
If the operator experiences persistent or recurring discomfort, pain, throbbing, aching, tingling, numbness, burning sensations or
stiffness, the operator should seek medical assistance.
Disconnect the sander from the airline before changing the tool, accessory or servicing the sander.
Do not use accessories and consumables that are not recommended by Sioux Tools. Avoid direct contact with the inserted tool
during and after use as it can be hot or sharp. Use only sizes and types of accessories that are recommended by Sioux Tools.
Do not use other sizes and types of consumables. Grinding wheels and cutoff wheels shall not be used. Check the maximum
operating speed of the sanding tool is higher than the rated speed of the sander.
Damaged tools can cause injury.
Workplace hazards around your work area can cause injury.
Be aware of slippery surfaces caused by the use of the tool and avoid trip hazards cause by the airline. Proceed with care in
unfamiliar surroundings. This sander should not be used in explosive atmospheres and is NOT insulated against contact with
electrical current. Ensure the work area is free from electrical cables, gas pipes and other hazards.
Be aware of your work area and hidden hazards that may be contacted by the drill.
Using the sander can generate dust and fume hazards.
Dust and fumes generated by the sander can cause ill health. Wear a respiratory mask when using the sander. Consider dust
created by the tool and existing dust disturbed by the tool. Direct the exhaust to minimize dust disturbance. Operate and
maintain the sander as recommended in order to minimize dust or fume emissions. Control dust at the point of emission. Select,
maintain, and replace the inserted tools as recommended in handbook to prevent unnecessary increase in dust and fumes.
Dust and fumes generated by sanding, may be explosive. All integral features or accessories for the collection, extraction or
suppression of dust and fumes should be maintained.
Dust and fumes generated during the drilling process may cause injury.
250 Snap-on Drive • PO Box 1596 • Murphy, NC 28906 • USA • Phone: 828-835-9765 •www.siouxtools.com
Form ZCE780A
SERIAL"B"
SAVE THESE INSTRUCTIONS!
WARNING
When used improperly power tools can create hazardous situations.
Do not discard these safety instructions, give to operator.
SANDER SAFETY
1
Original
Instructions
Form ZCE780A
Date 2023May5/M
Page 1 of 28
2023May5/M
Date