HAEGER DE-016.008A Instrucciones De Uso página 10

English
B) Continuous external draining
If the appliance is to be operated for long periods but you are unable to empty
the tank regularly, you are recommended to use the continuous drain facility.
1. Pull out appliance plug.
2. Cut the plastic sealing on back cover, which is circled in below picture.
3. Plug a plastic pipe (with an inner diameter of 9mm) to draining hole.
4. Draining tube should place lower than the draining hole to let water flow
out.
Note: Water pipe cannot be too long (usually 0.6m or 1m), the height cannot
surpass the height of drainage mouth, or there will be water leakage.
8
Fig. 1 Fig. 2
Instructions for use