Electrical Connection - HAEGER DE-016.008A Instrucciones De Uso

English

Electrical connection

Warning: Improper use of the grounded plug can result in the risk of
electrical shock. If the power cord is damaged, have it replaced by
an authorized service.
After moving the appliance, wait at least an hour before turning it on again.

Before plugging the appliance into the mains socket, check that:

– The mains power supply corresponds to the working voltage indicated
on the rating plate.
– The power socket and electrical circuit are adequate for the appliance.
– The power socket matches the plug. If this is not the case, have the
plug replaced by a qualified electrician.
– The mains socket is adequately earthed.
The plug, together with the grounding conductor, must fit into the wall

socket.
The mains plug must be freely accessible.

Do not cut or remove the ground wire from the power cord supplied under

any circumstances.
Use of extension cords is not recommended.

Operating Instructions
IMPORTANT: Before connecting the appliance to the power source, let
it stand upright for approximately 1 hour. This will reduce the possibility
of a malfunction in the cooling system from handling during
transportation.
IMPORTANT: In case you disconnect the device or in case of power
failure, wait for 3 minutes before restarting the device.
Before switching on your appliance, make sure that:
- the appliance is positioned in accordance with these instructions,
- the air inlet and outlet grills are completely unobstructed,
- the appliance is placed on a flat and stable surface,
4 Instructions for use