Urmet iPercom sinthesi steel 1060/71 Manual Del Usuario página 9

DESCRIPTION OF TERMINALS
}
SE+
Terminal pins of discharge electric lock with holding current for relay, if present
SE-
C Common lock relay contact
NC Normally closed lock relay contact
NO Normally open lock relay contact
}
V-
Auxiliary power terminals
V+
]
ILL Terminal pins for lighting of name holder tags, if necessary
]
PA Hall button terminals for operating lock relay
]
SP Door open sensor terminals
V5 Reference for external camera signal
V3 External camera signal
]
AD/ILA Ref. 1158/48 hearing aid audio device terminals
EXP Connector for button modules with expansion Ref. 1158/82 and Ref. 1158/84
LAN Ethernet connector for LAN RJ45
I2C DIGITAL
Connector for module with voice messages and led Ref. 1158/47
CONNECTOR
For further details, see the manual provided with the module with voice messages and leds.
Refer to the instructions contained in the system manual for wiring, maximum distances and confi guration
operations.
Use Urmet RJ45 connector kit for connections (product on sale until stocks last).
EXTERNAL CAMERA CONNECTION
Instead of the camera present in the module, an external camera can be connected to terminal pins V3,
V5.
To enable the external camera, move the jumper as shown below.
DS1060-127
TLC-EXT
}
SE2
9