Qlima Tectro SRE 1330 TC Instrucciones De Uso página 96

U
Transport cap
4
74
L
STORAGE (END OF THE HEATING SEASON)
At the end of the heating season, you must store the heater in a dust-free place, if
possible in its original packaging. Unused fuel cannot be used in the next heating
season. We therefore recommend that you burn up all fuel. If there is still some
fuel left, do not throw it away, but dispose of it in accordance with the local
regulations for the disposal of domestic chemical waste.
Always start the new heating season with fresh fuel. When you start re-using the
heater follow the instructions again (starting from section A and as specified).
M
TRANSPORTATION
Take the following measures to avoid fuel leakage during the transportation of
the heater:
1 Let the heater cool down.
2 Remove the removable tank 4 from the heater and remove the fuel filter.
Some drops may leak from the filter; keep a cloth at hand. Store the fuel filter
and the removable tank outside the heater.
3 Empty the fixed fuel tank (fig. U).
4 Place the transport cap.
5 Always move the heater in an upright position.
Make the fixed tank empty with a fuel pump before transportation or in case
of wrong or dirty fuel. First remove the fuel filter and then insert the fuel pump
into the empty fixed tank. Follow the same procedure if the fuel tank contains
water.
N
SPECIFICATIONS
Ignition
Fuel
Capacity (kW) max.
Capacity (kW) min.
Suitable space (m³)**
Fuel consumption (l/hr)*
Fuel consumption (g/hr)*
Burning time per tank (hr)*
Capacity removable tank (litres)
Weight (kg)
* At maximum setting ** Specified values are indicative
The CE marking corresponds with the compliance with the standards EN 60-335
part 1 (1995) and EN 50-165 (08/97)
electrical Dimensions (mm)
paraffin (including base plate)
3,00
1,08 Accessories:
48-120
0,313 Mains
250 Electrical consumption:
16 - igniter
5 - continuous
8,1 Fuse rating
width 371
depth 294
height 429
- transportation cap
230 V
-- AC 50 Hz
335 W
78 - 123 W
250V, 5A