Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 9: CLOSING STAND AND TRANSPORTING
THE GRILL
See Figures 17 - 18.
Never close the stand or attempt to move the grill unless the
grill is completely cool, the grease cup is empty, and the LP
gas cylinder is removed.
NOTE: Make sure the grate and removable insert are in
place and hood latch secured prior to closing the stand or
transporting the grill. This will help to keep all grates in place.
To close the stand:
Grasp the stand front handle and step on the release
lever.
Lift the stand front handle up and away from you.
Apply slight forward pressure until the release lever clicks
into place and the unit rests on the wheels and frame
support.
From this position, the GridIron
from place to place.
To lower a closed stand :
Stand at the wheel side of the collapsible stand and grasp
the stand front handle.
Tilt the unit toward you and then slowly lower it to the
ground.
Fig. 16
ASSEMBLY
grill can be moved easily
™
REGULATOR
12 — English
STAND
FRONT
HANDLE
RELEASE
LEVER
Fig. 17
Fig. 18
Publicidad
