Publicidad
Idiomas disponibles
Idiomas disponibles
EN
•
Open and close the blades a few times. If the blades do not completely close there is still air in the
system. Release the filler caps once again and continue filling with oil.
WARNING
The blades must always be open when the filler caps are released.
7.5.3
Spreading tips and arms (Fig. 7)
•
Check the spreading tips for damage. Replace the blades when the spreading tips are damaged or
worn.
•
Check whether the blades are straight. Have a Holmatro Certified Technician replace the blades if
there is more than 0.6 mm (3) separation.
7.5.4
Snap rings of hinge pins (Fig. 7)
•
Check that the snap rings of the hinge pins (1) are present and are not damaged. Have a Holmatro
Certified Technician mount a new snap ring if it is missing or damaged.
7.5.5
Centre bolt (Fig. 7)
•
Check that the tightening torque of the centre bolt (2) is 50 Nm.
•
Spray Teflon lubricating oil on and between the moving parts of the centre bolt while the tool is
opening and closing.
WARNING
The centre bolt may not be removed.
7.5.6
Hinge pins (Fig. 7)
•
Spray Teflon lubricating oil on and between the moving parts of the hinge pins (1) while the tool is
opening and closing.
WARNING
The hinge pins may not be removed.
7.5.7
Accessories
•
Check the accessories for damage, dirt and completeness. Replace damaged accessories and
make sure that the accessories are complete.
•
Remove dirt with clean running water. Dry the accessories. Apply a thin coat of preservative oil to
the external steel parts.
7.5.8
Carrying handle
•
Check the carrying handle for damage. Replace a damaged carrying handle.
•
Check the attachment of the carrying handle. If necessary, fasten it firmly by tightening the bolts.
7.6
Yearly dealer maintenance
We recommend having the equipment inspected, checked, set and tested once a year by a Holmatro
Certified Technician who has the appropriate knowledge and the necessary tools (see also section 1.7).
The Holmatro dealer can organize the yearly maintenance for you on a contract basis.
36
All manuals and user guides at all-guides.com
916.001.556_001
HCT 51** (RH)(ST)
Publicidad
