Basic Operations; Direct Access Tuning - Kenwood KDC-X596 Manual De Instrucciones

RC-405
(Not used.)

Basic operations

SRC : Selects the available sources.
VOL : Adjusts the volume level.
5 / ∞
: Enters Music Search mode or
Station Search mode (for Pandora).
ENT : Pauses/resumes playback.
Confirms selection (in Music
Search mode).
*AM– / #FM+ : Selects bands.
Selects folders.
4 / ¢ (+) : Fast-forward/reverses track
if pressed and held.
Searches for radio station.
Selects track/file.
¢ (+) : Skips a song (while listening to
Pandora).
1 – 6 : Selects preset station.
AUD : Enters [AUDIO CONTROL]
settings directly.
ATT : Attenuates the sound. (To return
to the previous level, press the
button again.)
: Returns to the previous item (in
Music Search mode).
EXIT : Exit from setting mode.
Caution:
Do not set the remote control in hot places
such as on the dashboard.
Lithium battery.
Danger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent type.
The battery pack or batteries shall not
be exposed to excessive heat such as
sunshine, fire or the like.
Keep battery out of reach of children and in
original package until ready to use. Dispose
of used batteries promptly. If swallowed
contact physician immediately.

Direct Access Tuning

1 Press #FM+ / *AM– to select a band.
2 Press DIRECT to enter Direct Access
Tuning mode.
"– – – –" appears on the display.
3 Press DIRECT repeatedly to select the
tuning item.
Tuning item: Frequency "– – – –",
Channel "HD –", or Cancelling Direct
Access Tuning
4 Press the number buttons to enter the
frequency or channel.
You can enter the FM band frequency in
steps of a minimum of 0.1 MHz.
5 Press 4 / ¢ (+) to tune in to the
entered frequency or channel.
To cancel Direct Access Tuning mode, press
or EXIT.
If no operations is done for 10 seconds
after step 3, Direct Access Tuning is
automatically canceled.
Continued...
15