OPERATION
Switch off cooking zones
● A given cooking zone must be active. Heat setting display pulsates.
● To switch off a cooking zone touch the on/off sensor field or touch the sensor (5) for 3
seconds.
Switch off the appliance
● The appliance operates when at least one cooking zone is on.
● To switch off the appliance touch the on/off sensor (1).
If a cooking zone is still hot, the relevant display (3) will show the letter "H" to indicate residual
heat.
Booster function "P"
The Booster Function increases the nominal power of the Ø 210-220 mm cooking zone from
2000W to 3000W,
Ø 160-180 mm cooking zone from 1200W to 1400W,
In order to activate the Booster function, select the cooking zone, set the heat setting to "9" and
then touch the "+" (2) sensor field again. The letter "P" will be shown on the display.
To deactivate the Booster function, touch the "-" (4) sensor field to reduce the heat setting or
lift the cookware from the cooking zone.
For 210-220 mm and 160-180 mm cooking zone, operation of the Booster function
is limited to 10 minutes. Once the Booster function is automatically deactivated,
the cooking zone continues to operate at its nominal power.
The Booster function can be reactivated, provided the appliance electronic circuits
and induction coils are not overheated.
When the pot is lifted from the cooking zone when the Booster function is in
operation, it remains active and the countdown continues.
When the appliance electronic circuits or induction coils overheat when the
Booster function is in operation, it is automatically deactivated. The cooking zone
continues to operate at its nominal power.
47