Octane Seating OCT-BSAR200 Manual Del Usuario página 5

1.
Power Button
Press the power button on the front panel of the OCT-BSAR200 to turn on and off the
amplifier.
2.
Power LED
The amplifier LED will be BLUE if the amplifier is active and ready to use. If the amplifier is in
auto/standby mode the LED will be RED.
3.
Frequency Adjustment
Rotate the frequency adjustment left or right to set the desired frequency output. The
adjustment range is from 50Hz to 200Hz.
4.
Balance Adjustment
Rotate the balance adjustment (stereo mode) left or right to set the desired output balance of
left and right channels.
5.
Intensity Adjustment
Press the intensity - or + button to adjust the amplifier output to the desired level.
6.
Remote
The included wired remote control has an intensity adjustment and power button for your
convenience but is not required to operate the amplifier. Connect the remote to the front
panel, be careful to properly align the connector.
AMPLIFIER OPERATION – FRONT PANEL
3