Publicidad
Idiomas disponibles
Idiomas disponibles
of solid objects in the interior of the grinder. Never turn on the grinder with any
moving parts not correctly in place.
Put the Hopper cover (1) in place (on the top of the Hopper (2)) after filling it. Never
run the coffee grinder without the Hopper (2) properly fixed. Never run the grinder
without the dispenser lid (7) correctly in place. Take into account the maximum
operation time detailed on the specification plate.
While filling the Hopper (2) make sure no objects accidentally fall into it. Always
follow the instructions in this manual. Make sure the machine in not operated by
anyone who has read this manual
- The appliance should not be cleaned under running water.
- If the power cord is damaged, the manufacturer must replace it, by its aftersales
service or by similar qualified personnel.
- Any precautions that must be taken during the maintenance to be performed by
the user
Regular maintenance checks:
If you observe any abnormal operation, turn off and unplug the coffee grinder
immediately from the mains outlet and contact Technical Service. Any possible
repairs must be made by Technical Service or by authorized dealer personnel.
Do not try to modify the coffee grinder in any way. Use only Original Spare Parts,
provided by the manufacturer in all repair work.
All maintenance work should be done with the coffee grinder off and unplugged
from the mains.
Any safety instruction that is considered appropiate, apart from the previous ones
required by the standard:
Cleaning precautions. Safety guidelines:
- Before cleaning any part of the coffee grinder make sure you turn it off using the
ON/OFF switch (11) and unplug it from the mains outlet.
- Never clean the grinder submerging in water.
- Do not use abrasive cleaners or chemical solvents.
32
Before using the coffee grinder, follow the instructions to load coffee beans,
which is a maintenance operation to be carried out by the user:
- Make sure the coffee bean Hopper (2) is correctly placed and attached.
- Close the trap (5) preventing the beans from entering to the blades.
- Lift the hopper lid by removing the fixing screws (1), fill the hopper (2) and close
the lid. Except during the operation of fillind with coffee beans and cleaning the
hopper, it is essential that the lid is always in position to maintain the quality
of the coffee and prevent the entry of any foreign.
- Slide the trap (5) to its outer positions letting the beans drop into the grinder.
EN
33
Publicidad
