Publicidad
Idiomas disponibles
Idiomas disponibles
33
User-Adopted Safety Measures
Although coffee grinders are equipped with all the safety devices and mesures necessary
for completely safe use, in order to prevent possible harm it is very important that the user
follow the safety measures indecated below:
a) Never handle or operate the coffee
grinder while barefoot.
b) Never handle or operate the coffee
grinder with wet or damp hands or feet.
c) Avoid wetting the outer surface of the
coffee grinder. If it does get wet during
operation, or even when not operating,
unplug it immediately and dry it thoroughly.
d) Avoid the penetration of solid objects in
the interior of the coffee grinder. If any solid
or liquid accidentally falls into the machine
during operation or when stopped, unplug
the coffee grinder immediately and have it
checked by Technical Service.
e) In general, never turn on the coffee
grinder with any moving parts not correctly
in place.
f) Always put the hopper lid (1) in place (on
top of the hopper (2)) after filling the hopper
with coffee beans and before turning on the
coffee grinder.
g) Never run the coffee grinder without the
hopper (2) correctly in place and attached by
lock screws (3).
52
h) Never run the coffee grinder without the
dispenser lid (7) correctly in place.
i) In general, coffee grinders should not be
run continuously for longer than 30 minutes
at a time (check the specifications plate
attached to your coffee grinder).
j) While filling the hopper (2), make sure
no objects (necktie, scarf, hair, jewellery...)
accidentally fall into the hopper or the
adjustment platen (4).
k) Always follow the instructions in this
manual for all processes involving operation,
cleaning and maintenance.
l) Like with any other machine, make sure
the machine is not operated by anyone
who has not read this manual carefully
and thoroughly, or who is not prepared to
make appropiate use of the device, such as
children.
34
Safety Device Preventing
Contact with Grinding Blades
There is a safety guard located in the lower
portion of the coffee bean hopper (2) to
prevent contact with the grinding blades.
This device lets the coffee beans drop into
the grinder housing, but prevents fingers
from getting caught due to the small size
of the hole.
35
Motor Thermal Protector
A thermal protector prevents overheating of
the electric motor coils, cutting off power
when the temperature rises above the maxi-
mum admissible level due to a malfunction
like continued blockage of the motor.
36
Residual Risks
IT IS VERY IMPORTANT FOR YOUR SAFETY
to make sure before turning the coffee
grinder on that the hopper (2) is well-
attached and fixed by the 2 fixing points (3).
If not, when the coffee grinder is turned on,
the grinding blades start to spin and can be
easily touched with the fingers.
(3)
Therefore,
UNDER
NO
CIRCUMSTANCES
SHOULD THE COFFEE GRINDER BE TURNED
ON WITHOUT THE HOPPER (2) IN PLACE AND
SECURED TO THE ADJUSTMENT PLATEN (4) BY
MEANS OF THE LOCK SCREWS (3).
EN
53
Publicidad
