Samsung VS28C97 Serie Manual Del Usuario página 17

Operation
Using the buttons and display
NOTE
• The 'AI' mode is only available if the Active Dual Brush or Slim LED Brush+ is assembled.
• The 'AI' mode may not work well on some floor environments (floors with thin rugs and some yoga mats
with grooves, etc.).
• The automatic brush rotation speed adjustment in the 'AI' mode is only available when the Active Dual
Brush is attached.
• Only the + button works when the vacuum cleaner is in the 'WET' mode.
• You cannot enter the language settings when the vacuum cleaner is in the 'WET' mode.
• The Energy Saving mode is automatically disabled if you use the vacuum cleaner.
• The brush may cling to the floor or does not turn properly depending on the floor material (a carpet, a
mat, bedding, etc.). If such a problem occurs, change the suction power mode to 'MIN or MID' .
Selecting the language
1. Press and hold the + button for 3 seconds to enter or exit the language setting.
2. Press the + or – button to select a language.
16 English
Untitled-27 16
01 Display
- Displays the current mode ('MIN, AI, MID, MAX, JET, or WET') or the
alert message.
02 Power ( )
- Press this button to turn on or off the vacuum cleaner.
- When you turn on the power, the vacuum cleaner starts in the 'MID'
mode.
- If you assemble the Spray Spinning Sweeper, the vacuum cleaner
starts in the 'WET' mode.
- If you assemble the Active Dual Brush or Slim LED Brush+, the
vacuum cleaner starts in the 'AI' mode.
03 Suction power control (+ / -)
- You can change the suction power mode ('MIN, AI, MID, MAX, or
JET').
- In the 'AI' mode, the vacuum cleaner automatically adjusts
the suction power and brush rotation speed according to the
surrounding environment for optimized performance. The vacuum
cleaner proceeds the optimization process for 1 ~ 2 seconds when it
detects changes in the floor.
- In the 'WET' mode, press the + button to spray water once or press
and hold the + button to spray water for up to 2 seconds.
- While the vacuum cleaner is on the Clean Station, press and hold the
+ button for 5 seconds to enable or disable the Energy Saving mode.
Press and hold the Auto Empty button on the Clean Station for 15
seconds to turn off the Wi-Fi and save extra energy.
2023-05-15 3:53:52