Descargar Imprimir esta página

Vermeiren Verso Manual De Instrucciones página 13

Ocultar thumbs Ver también para Verso:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 121
1. ON/OFF button
2. Battery charge indicator
3. Speed indicator
4. Horn button
5. Speed decrease button
6. Speed increase button
7. Joystick
3.3.1
Technical protections
For your own safety, and to prevent that the wheelchair gets damaged, movements are monitored
by the electronics. This may result in speed decrease or complete stop.
 To avoid accidental battery run down, your wheelchair is equipped with an automatic power
shutdown system. This system switches off the operating console automatically when it is not
operated for a while. If this occurs, simply switch your console back on.
 Make sure that the free-wheel lever is in braking position BEFORE switching the wheelchair
ON. Electromagnetic brakes do NOT function if the wheelchair is in free-wheel mode. This is
indicated on the operating console. Driving is not possible.
3.3.2
Driving
1. Press the ON/OFF button (1) to switch on the wheelchair.
2. If the lights of the battery charge indicator (2) and speed indicator (3) go on, the wheelchair
is powered and ready to go.
3. Check the battery status indicator. Charge the battery if necessary (see §3.7).
4. Adjust the driving speed: decrease the speed with the speed decrease button (5), or increase
the speed with the speed increase button (6).
5. Start moving the wheelchair by operating the joystick (7) slowly forwards/backwards.
6. The speed will increase when you push the joystick further out of the centre.
7. To turn left or right, push the joystick to the left or right.
8. To brake, move the joystick to neutral position.
9. Press the horn button (4) to alert other road users if necessary.
10. After arrival, check the battery status and press the ON/OFF button to switch off the
wheelchair.
11. Charge the battery if necessary.
3.3.3
Operation console lock
The control system can be locked to prevent unauthorized use.
To lock the powerchair:
1. While the control system is switched on, press and hold the On/Off button.
2. After 1 second the control system will beep. Now release the On/Off button.
3. Deflect the joystick forwards until the control system beeps.
4. Deflect the joystick in reverse until the control system beeps.
5. Release the joystick, there will be a long beep.
6. The powerchair is now locked.
4
2
1
3
5
11
Verso
2023-06
Using your wheelchair
6
7
EN
NL

Publicidad

loading