Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
3. Place 2 – 3 drops of air tool oil
(not included) into the opening of the
male air plug before each use
(See Figure 3).
NOTE:
Use a mineral-based or synthetic air
tool oil in your pneumatic air tool.
Failure to use air tool oil will cause damage
to the tool and void the warranty.
4. Select the correct impact socket
and push it onto the anvil (B2) until it
snaps into place.
(See Figure 4).
Use only adapters and sockets with a torque
rating equal to or greater than the tool itself.
Always make sure adapters and sockets are
properly mounted and secure before using
the tool. Loose attachments can break or fly
off, causing serious injury to the operator or
bystanders in the work area. Always follow
all manufacturers' specifications for proper
attachment and use.
5. For a longer reach, mount the socket onto
the end of an extension bar (not included)
and then push the extension bar onto the
anvil (See Figure 5).
NOTE:
Make sure the socket and extension
bar are securely fastened before operating
the tool.
NOTE:
To be able to use 1/2 in sockets on
the 3/8 in ratchet use the 3/8 in to 1/2 in
adapter (F). Attach it the same way you
would Figure 5 on page 14.
WA R N I N G
3
4
5
16
B2
B2
Publicidad
