Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT SPECIFICATIONS
AIR HAMMER
COMPONENT
CHISEL SHANK DIAMETER
STROKE LENGTH
BLOW PER MINUTE (BPM)
AVERAGE AIR CONSUMPTION
AIR INLET
AIR HOSE
WORKING PRESSURE
SAFETY INFORMATION
Please read and understand this entire manual before attempting to
assemble, operate or install the product. If you have any questions regarding
the product, please call customer service at 1-888-3KOBALT
(888-356-2258), 8:00 a.m.-8:00 p.m., EST, Monday-Sunday. You could also
contact us at partsplus@lowes.com.
Improper operation or maintenance of these tool could result in serious
injury and property damage. Read and understand all warnings and
operation instructions before using these tool. When using any tool, basic
safety precautions should always be followed to reduce the risk of personal
injury. Use each tool for its intended function only. Do not use this product in
unsafe work conditions. It is always recommended to keep a fire
extinguisher and first aid kit near work areas.
FAILURE TO OBSERVE AND FOLLOW SAFETY INSTRUCTIONS COULD
RESULT IN INJURY OR DEATH.
To reduce your exposure to chemicals, work in a well-ventilated area and
work with approved safety equipment, such as a respirator or dust masks
which are specially designed to filter microscopic particles.
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to the state of California to
cause cancer, birth defects, or other reproductive harm. Some examples of
these chemicals are:
Lead from lead-based paints
Crystalline silica from bricks, cement, and other masonry products
Arsenic and chromium from chemically-treated lumber
SPECIFICATIONS
0.401 IN.
1.4 IN.
3,800 BPM
5.8 SCFM
1/4 IN. NPT
3/8 IN.
90 PSI
WARNING
WARNING
4
Publicidad
