Publicidad
Idiomas disponibles
Idiomas disponibles
CHARGING THE BATTERY
1. Before charging, make sure that the power switch is turned off.
Total charging time: 4-6 hours
Total working time: 90 minutes.
2. Be sure that the battery is properly installed.
3. To charge, plug one end of the adaptor into the D.C. jack and the other end into an AC
power outlet (see diagram).
4. When charging, the battery LED indicator will flash until fully charged.
5. When the cleaner has low power, the battery LED will flash very quick. When it runs
out of power, the battery LED will go off and the cleaner will automatically stop. The
battery needs immediate charging.
1. Adaptor plug
Control Panel:
2. D.C. Jack 3. Switch 4. Power LED Indicator
ANTI-ROLLING COVER
• Pull out the anti-rolling cover to prevent the robot from wrapping around the wires
while moving.
Publicidad
