Publicidad
Idiomas disponibles
Idiomas disponibles
3. Clean the dust bin
• Rinse the dust bin with tap water.
• Please do not put the bin into the washing machine.
4. Re-installation
• Once dry, re-install the filter according to the diagram below.
• Re-insert the dust bin and the top cover.
CLEANING THE FILTER
Periodically clean the filter with the cleaning tool
or the soft bristle brush.
CLEANING THE INTAKE
After repeated use, dirt and dust can accumulate around the intake. To ensure the best
working efficiency and constant airflow, the intake should be cleaned periodically.
1. First of all, turn off the power.
2. Clean the dirt and dust accumulated around the intake.
CLEANING THE BRUSH
1. Turn off the power, place the bottom of the
cleaner upward on a flat surface. Hold the two
opposite sides of the brush (see diagram be-
low), and evenly pull upward to remove the
brush. Then you can clean the brush.
Publicidad
