Medisana HKC Instrucciones De Manejo página 17

•
If you experience any pain or discomfort while using the
unit, stop using it immediately.
2 Operating
Thank you very much for your confidence in us and congratulations!
With this heat pad resp. heat pad for neck and back you have purchased a quality
product by MEDISANA. To ensure the best results and long-term satisfaction with
your heat pad resp. heat pad for neck and back, we recommend that you read the
following operating and maintenance instructions carefully.
2.1 Items supplied and packaging
Please check first of all that the unit is complete and is not damaged in any way. If
in doubt, do not use the appliance. Send it to a service point.
The following parts are included:
1 MEDISANA heat pad resp. heat pad for neck and back with removable control
unit
1 additional cover for exchanging (only art. 61144 HP 615)
1 Instruction manual
The packaging can be reused or recycled. Please dispose properly of any packag-
ing material no longer required. If you notice any transport damage during un-
packing, please contact your dealer without delay.
WARNING
Please ensure that the polythene packing is kept away from the
reach of children! Risk of suffocation!
2.2 Operation
You can use the MEDISANA heat pads to gently warm and relax various parts of
the body. Using the heat pad stimulates blood circulation in hardened muscles and
helps you to relax after a strenuous day. The heat pad features an electric tempera-
ture control that regulates the temperature according to the chosen setting. Only
use the heat pad in the cover supplied with it.
Make sure, the connection cable of the control unit is properly connected to the
plug of the heat pad. Plug the unit into the mains outlet and move the slider control
from position 0 to position 1. The power LED will light up in orange (warm up
phase) and after reaching the final temperature level it will light up in green.
After a few minutes you will be able to feel the pad getting noticeably warmer. If
you require a higher temperature setting, move the switch to the next positions 2
or 3 or the maximum heat setting, position 4. If the heat pad gets too hot for you,
move the slider back to position 3, 2 or 1. After a short time, the heat pad will cool
down. The heat pad has an accurate electronic control system. Depending on the
room temperature, the LED may change from orange to green colour and back
within seconds. This indicates the fast re-heating and is normal.
1 Safety information / 2 Operating
GB
E
E
E
G
G
G
G
13