Descargar Imprimir esta página

CORBERO CPCGY2304N Instalación E Instrucciones De Uso página 13

Publicidad

Idiomas disponibles

Idiomas disponibles

CLEANING
VITREOUS E N A M E L
Hotplate, burner caps, pan supports.
Cloth wrung out in hot soapy water. Stubborn stains. Can be removed with a cream paste
approved by the Vitreous Enamel Development Council, liquid cleaner or by rubbing with fine steel wool soap pads.
NOTE: The pan supports can also be cleaned in the dishwasher.
ALUMINIUM
Hotplate burner bodies.
Similar to paint cleaning above. Use a nylon brush to remove any cleaning materials, water or dirt from the
hotplate burner bodies. After cleaning, wipe dry and refit to the hob ensuring they are correctly seated.
Check parts are reassembled correctly by lighting the burners and allowing to dry out.
PLASTIC
Control knobs.
Wipe with a cloth wrung out in hot soapy water.
STAINLESS STEEL
Cloth wrung out in hot soapy water.
SAFETY INSTRUCTIONS
Ensure that these notes and that the whole of this instruction book is thoroughly read and understood
before installation or operation of the hob.
The instructions are provided in the interest of your safety.
2

Publicidad

loading

Este manual también es adecuado para:

Cpcgy2314wCpcgy2303nCpcgy2313w