Publicidad
Idiomas disponibles
Idiomas disponibles
Engine Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Air-Cooled, 2-Cycle
Displacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 cc (1.52 cu. in.)
Spark Plug Gap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.025 in. (0.635 mm)
Spark Plug (USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Champion® RDJ7J or Equivalent Plug
Spark Plug (Canada). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Champion® QDJ7J or Equivalent Plug
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fuel/Oil Mixture
Fuel/Oil Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40:1
Fuel Tank Capacity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.5 fl. oz. (399 ml)
Approximate Unit Weight (No Fuel) (Varies by Model) . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 10 lbs. (4.1 - 4.5 kg)
Air Volume** (Measured at: Upper Tube / Nozzle). . . . . . . . . . . . . . . . . . . . . . . . . 400 / 250 cfm (11 / 7 m
Air Speed (Peak)** (Measured at: Upper Tube / Nozzle) . . . . . . . . . . . . . . . . . . 90 / 180 mph (145 / 290 km/h)
Air Speed (Average)** (Measured at: Upper Tube / Nozzle). . . . . . . . . . . . . . . 75 / 150 mph (120 / 240 km/h)
Canada: This spark ignition system complies with Canadian ICES-002.
* All specifications are based on the latest product information available at the time of printing. We
reserve the right to make changes at any time without notice.
** Measured per ANSI B175.2.
WARNING:
before removing or installing blower tubes or nozzles.
WARNING:
upper blower tube firmly installed.
ASSEMBLING THE UNIT
•
Always install the upper blower tube.
•
Only use the nozzle to concentrate and intensify the air flow when needed. DO NOT use the nozzle
for general work or for long periods.
Installing the Upper Blower Tube
1. Set the unit on a flat, level surface.
2. Align the slot on the upper blower tube with the tab on the blower outlet (Fig. 1).
3. Push the upper blower tube onto the blower outlet until the tab locks securely into the slot (Fig. 1).
SPECIFICATIONS*
ASSEMBLY
To avoid serious personal injury and damage to the unit, shut the unit off
To prevent serious personal injury, never operate the unit without the
12
3
/min)
Publicidad
